How to Install the Mouse Driver
Currently the driver only works with Windows 2000/XP. To install, follow the instructions below.
Windows 2000
To install the driver:
- All your input devices must be working under Windows (i.e. the old version of the USB driver must not be running, the device should not be disabled etc.)
- You must be Administrator.
- Select "System" from the control panel.
- Select the "Hardware" tab.
- Click "Device Manager".
- Expand the "Mice and other pointing devices"-tree.
- Double-click on the desired input device.
- Select the "Driver" tab.
- Click "Update Driver".
- Click "Next"
- Select the proper subsection below.
PS/2
- Make sure "Display a list of known drivers..." is selected.
- Click "Next".
- Click "Have Disk".
- Select the correct location (This is typically C:\\Program Files\\CPN Tools\\Mouse driver).
- Click "Ok".
- Select "CPN Tools mouse filter driver PS/2"
- Click "Next".
- Click "Yes".
- Click "Next".
- Click "Yes".
- Click "Finish" and you're done.
Serial/USB
- Make sure "Search for a suitable driver for my device (recommended)" is selected.
- Click "Next".
- Make sure "Specify a location" is the only option selected.
- Enter the correct location for the driver files (This is typically C:\\Program Files\\CPN Tools\\Mouse driver).
- Click "Ok".
- If Windows finds a "CPN Tools mouse filter driver" device, simply click "Next", then "Yes", "Finish", and you're done.
- Otherwise, select "Install one of the other drivers".
- Click "Next".
- Click "Yes"
- Select the "CPN Tools mouse filter driver". If this is not available, check [[How to determine VID and GID]] for information.
- Click "Next".
- Click "Finish", and you're done.
Windows XP
To install the USB driver, simply:
- All your input devices must be working under Windows (i.e. the old version of the USB driver must not be running, the device should not be disabled etc.)
- You must be Administrator.
- Select "System" from the control panel. If "System" is not visible, click "Select classic view" at the left of the window.
- Select the "Hardware" tab.
- Click "Device Manager".
- Expand the "Mice and other pointing devices"-tree.
- Double-click on the desired input device.
- Select the "Driver" tab.
- Click "Update Driver".
- Make sure "Install from a list or specific location" is checked.
- Click "Next"
- Make sure "Don't search. I will choose the driver to install" is checked.
- Click "Next".
- Click "Have Disk".
- Select the correct location (This is typically C:\\Program Files\\CPN Tools\\Mouse driver).
- Click "Ok".
- Select the correct "CPN Tools mouse filter driver" (For USB and serial devices the correct is auto-detected, for PS/2 devices, all of USB, Serial and PS/2 are available; select PS/2 in this case).
- Click "Next".
- Click "Yes".
- Click "Continue Anyway".
- Click "Finish".